home
site_map
help
Répertoires disponibles

Model library

Last modified: 06/24/2011 05:16 PM

Objects: 1 - 30 of 33

Adiabatic diffuser model
08/23/2011 05:55 AM: v12- English published , 155 K
An adiabatic diffuser is a fixed component that serves to convert into pressure a portion of the kinetic energy available in a gas. When the flow velo...
Adiabatic nozzle model
08/23/2011 05:56 AM: v12- English published , 162 K
An adiabatic nozzle is a fixed component that allows one to convert in kinetic energy the pressure of a gas.
Turbojet driver
08/11/2011 09:49 PM: v6- English published , 1 K
The turbojet driver allows one to coordinate updates to the diffuser, the nozzle and the compression ratio in the whole project, to calculate the valu...
Solar concentrator model
06/29/2011 10:39 PM: v3- English published , 97 K
The solar flux received by the collector is first reflected on the mirrors of the concentrators, then it generally passes through a glazing material f...
External substance "Dowtherm A"
08/23/2011 05:03 AM: v8- English published , 46 K
This external substance is used to model a thermal oil used as a transfer fluid, particularly in solar concentrators.
Direct contact cooling tower model
08/23/2011 06:12 AM: v9- English published , 195 K
The model is based on a global enthalpy reasoning in which are assumed known the inlet and outlet conditions air side and the inlet ones water side.
Model of the cooling and condensation of a moist gas
01/17/2012 02:54 AM: v7- English published , 1 K
The cold battery external divider is used to model the cooling and condensation of water in the moist gas. This is a simplified model, which has two p...
Mixed ionic-electronic conducting MIEC model
08/23/2011 05:49 AM: v4- English published , 188 K
At high temperatures (above 700 °C), the mixed ionic-electronic ceramic membrane is a conductor, through which pass simultaneously O2-ions and electro...
CO2 emissions model
06/29/2011 10:50 PM: v3- English published , 136 K
This external process can be placed downstream of any combustion chamber. The CO2 flow-rate is calculated from the CO2 concentration and the gas flow-...
Model of a cooling coil with condensation
01/03/2012 01:21 AM: v12- English published , 1 K
The dehumidifying coil external divider is used to model the cooling and condensation of water in moist gases. This is a specific model, the parameter...
Gas humidification by water quench
06/29/2011 10:55 PM: v4- English published , 227 K
This quadrupole type model is used to wash a synthesis gas at the outlet of a biomass gasifier.
Saturation of a moist gas model
08/23/2011 06:44 AM: v6- English published , 131 K
This model is of quadrupole type. The saturator behaves like a moist mixer, and is calculated as such. Saturator class is a variant of the water quenc...
Indirect contact cooling tower model
08/23/2011 06:54 AM: v9- English published , 174 K
The models we built are based on a global enthalpy reasoning in which are assumed known the inlet and outlet conditions air side and the inlet ones on...
Reactor model for CLC cycle (Chemical Looping Combustion)
06/29/2011 11:01 PM: v5- English published , 332 K
CLC (Chemical Looping Combustion) cycle is one of the innovative power generation cycles using oxy-combustion, where the combustion chamber is replace...
CO shift reactor model
08/23/2011 10:14 AM: v5- English published , 65 K
The water gas shift reaction is often used to convert CO to CO2 CO2 + H2 <-> CO + H2O It is a catalytic reaction carried out in one or ...
Biomass combustion model
08/23/2011 06:59 AM: v7- English published , 195 K
This is a simplified model that allows one to simulate different types of biomass combustion, in which it is possible to vary in a fairly flexible way...
Models of ejectors
08/23/2011 07:16 AM: v9- English published , 290 K
An ejector or injector receives as input two fluids normally gaseous but which may also be liquid or two-phase: the high pressure fluid called prim...
Modèle de l'échappement d'un moteur alternatif à combustion interne
11/08/2007 08:16 PM: v3- French published , 1 K
Ce modèle premet de déterminer l'état des gaz d'échappement en sortie d'un moteur diesel ou à essence
External substance "LiBr_H2O"
07/07/2011 05:36 PM: v8- English published , 115 K
This external substance is used to model the pair (LiBr-H2O) used especially in absorption chillers.
Absorber for LiBr-H2O absorption cycle
07/07/2011 08:01 PM: v9- English published , 86 K
An absorber is a component in which enter the vaporized coolant and the weak solution preheated in the solution exchanger, and out of which leaves the...
Desorber for LiBr-H2O absorption cycle
11/24/2011 06:33 PM: v9- English published , 1 K
A desorber is a component that receives a heat flux from the heat source, in which enter the rich solution at high pressure, preheated in the solution...
External substance "liquid sodium (Na)"
08/23/2011 04:58 AM: v7- English published , 18 K
This external substance is used to model the liquid sodium used as a transfer fluid, especially in nuclear reactors.
External substance "EauSolute"
06/29/2011 11:17 PM: v5- English published , 18 K
This external substance is used to model a water-solute solution with a boiling point elevation. The principle of calculation is to consider that t...
Evaporator model
08/23/2011 10:23 AM: v7- English published , 116 K
An evaporator acts as a divider receiving as input the product to concentrate, and from which exit two fluids: mists (water vapor) and the concentrate...
Desuperheater model
06/29/2011 11:21 PM: v3- English published , 57 K
A desuperheater is a device that reduces or nullifies the steam superheating. This model determines the flow of desuperheating liquid required to obta...
Flash chamber model
11/04/2011 02:40 PM: v10- English published , 1 K
During an operation of desalination, a process is to perform a flash of salt water, which has the effect of vaporizing a fraction of the total flow-ra...
Reverse osmosis unit model
06/29/2011 11:25 PM: v7- English published , 95 K
During an operation of desalination, a process is to perform a reverse osmosis. A reverse osmosis unit acts as a divider receiving in input the sal...
External substance "EauSalee"
08/29/2011 03:45 PM: v5- English published , 1 K
This external substance is used to model a salt water solution with a boiling point elevation. The principle of calculation is to consider that the...
Cooled air compressor driver
09/05/2011 01:57 PM: v5- English published , 193 K
This driver was built to study the behavior of a cooled air compressor that fills a compressed air storage of given volume under variable pressure. Th...
1  2  Next (>>)
Hosted by Center for Energy and Processes of Ecole des Mines de Paris -This site is powered by Zope,CPS, which includes CPSSkins.